product-image
 

KX124-1050
Tri-Axis, User Selectable ± 2g, 4g, 8g, Digital (I2C/SPI) Output, Integrated FIFO/FILO buffer, 3x3x0.9mm LGA - KX124-1050

The KX124-1050 is a tri-axis +/-2g, +/-4g or +/-8g silicon micromachined accelerometer with integrated 2048 byte buffer, orientation, tap/double tap, activity detecting, and Free fall algorithms. The sense element is fabricated using Kionix’s proprietary plasma micromachining process technology. Acceleration sensing is based on the principle of a differential capacitance arising from acceleration-induced motion of the sense element, which further utilizes common mode cancellation to decrease errors from process variation, temperature, and environmental stress. The sense element is hermetically sealed at the wafer level by bonding a second silicon lid wafer to the device using a glass frit. A separate ASIC device packaged with the sense element provides signal conditioning, and intelligent user-programmable application algorithms. The accelerometer is delivered in a 3 x 3 x 0.9 mm LGA plastic package operating from a 1.71 – 3.6V DC supply. Voltage regulators are used to maintain constant internal operating voltages over the range of input supply voltages. This results in stable operating characteristics over the range of input supply voltages. I2C or SPI digital protocol is used to communicate with the chip to configure and check for updates to the orientation, Directional TapTM detection, Free fall detection and activity monitoring algorithms. With user-selectable I2C address assignment, as many as 4 accelerometers can be placed on the same I2C serial bus when two KX124-1051 accelerometers are used in conjunction with two KX124-1050 accelerometers.

特點:

  • 3x3x0.9mm LGA
  • User-selectable g Range and Output Data Rate
  • User-selectable low power or high resolution mode
  • Digital High-Pass Filter Outputs
  • Embedded 2048 byte FIFO/FILO buffer
  • Internal voltage regulator to maintain constant internal operating voltages throughout the 1.71 - 3.6V input supply range
  • Low Power Consumption with FlexSet™ Performance Optimization
  • Internal voltage regulator
  • Enhanced integrated Free fall, Directional Tap/Double-TapTM, and Device-orientation Algorithms
  • User-configurable wake-up function
  • Digital I2C up to 3.4MHz
  • Digital SPI up to 10MHz
  • Lead-free Solderability
  • Excellent Temperature Performance
  • High Shock Survivability
  • Factory Programmed Offset and Sensitivity
  • Self-test Function

亮點

  • Small Footprint
  • Extra large embedded 2048 byte FIFO/FILO buffer
  • Digital High-Pass Filter Outputs
  • Enhanced integrated Free fall, Directional Tap/Double-Tap™, and Device-orientation Algorithms
  • User-selectable Output Data Rate up to 25600Hz
  • User-configurable wake-up function
  • Excellent Temperature Performance
  • High Shock Survivability
  • Alternative I2C Serial Addresses

產品規格

G 值範圍 靈敏度 噪音 (µg/√Hz) 解析度 封裝尺寸 引腳 封裝類型 介面 (輸出) 啟動 工作溫度 (Min.)[°C] 工作溫度 (Max.)[°C] 供應電壓 [V] 電流消耗
3 2g, 4g, 8g, User-selectable 16384, 8192, 4096 (16-bit), (counts/g) 100 8-bit, 16-bit 3x3x0.9mm 16-pin LGA Digital SPI/I²C Yes -40 85 1.71-3.6 10-145 μA

評估板

零件號 立即購買 說明 文件
EVAL-KX124-1050 Cart KX024-1050 Evaluation Board Board Schematic
Board Layout

開發人員工具

立即購買 說明
USBDEVKIT Cart This Kit is composed of a Kionix Evaluation Board on which is soldered a customer-specified 3.3V Kionix accelerometer product, a Silicon Labs C8051F340DK that provides the microprocessor control and USB interface, and a Kionix F340 Adapter Board that provides the link between the Kionix Evaluation Board and the microprocessor.