TRI-AXIS 16-BIT ACCELEROMETERS SUPPORTING RANGES FROM ±8G TO ±64G, DIGITAL (I²C/SPI) OUTPUT, ADVANCED DATA PATH, ADVANCED WAKE-UP/BACK-TO-SLEEP ENGINE, FIFO BUFFER, -40°C TO +105°C OPERATING TEMPERATURE RANGE, EMBEDDED TEMPERATURE SENSOR IN A 2X2X0.9MM LGA 12-PIN - KX134-1211
The KX134-1211 is a tri-axis ±8g, ±16g, ±32g, ±64g silicon micromachined accelerometer featuring a user-configurable 3 stage Advanced Data Path (ADP) consisting of a low-pass filter, low-pass/high-pass filter, and RMS calculation engine. The new KX132-1211 accelerometers also feature advanced Wake-Up and Back-to-Sleep detection with a high-resolution threshold capability configurable down to 15.6mg, embedded temperature sensor, 512-byte buffer that continues to record data even when being read, and embedded engines for orientation, Directional-TapTM/Double-TapTM, and Free fall detection. The sense element is fabricated using Kionix’s proprietary plasma micromachining process technology. Acceleration sensing is based on the principle of a differential capacitance arising from acceleration-induced motion of the sense element, which further utilizes common mode cancellation to decrease errors from process variation, temperature, and environmental stress. The sense element is hermetically sealed at the wafer level by bonding a second silicon lid wafer to the device wafer. A separate ASIC device packaged with the sense element provides signal conditioning and intelligent user-programmable application algorithms. The new KX134-1211 accelerometers offer lower noise and improved linearity over of the entire temperature range. The accelerometer is delivered in a 2 x 2 x 0.9 mm LGA 12-pin plastic package operating from a 1.7V – 3.6V (VDD) / 1.2V-3.6V (IO_VDD) DC supplies. Internal voltage regulators are used to maintain constant internal operating voltages over the range of input supply voltages. This results in stable operating characteristics even if the supply voltage changes. I²C or SPI digital protocol is supported to configure the chip, read acceleration outputs, and check for updates to the orientation, Directional-TapTM/Double-TapTM detection, Free fall detection, and activity monitoring algorithms. Two configurable interrupt pins are also available to show the output of the embedded detection algorithms.
- Advanced Data Path with user configurable 3 stages consisting of a low-pass filter, low-pass / high-pass filter, and RMS engine.
- High Temperature Range -40°C to +105°C
- Integrated Free fall, Directional-Tap/Double-Tap™, and Device-orientation Algorithms
- Advanced Wake-Up and Back-to-Sleep detection with high-resolution threshold configurable down to 15.6mg
- Embedded 512-byte FIFO buffer with capability to record data even when being read
- Embedded temperature sensor
- User-selectable Output Data Rate up to 25600Hz
- User accessible manufacturer and part ID registers
|軸||G 值範圍||靈敏度||噪音 (µg/√Hz)||解析度||封裝尺寸||引腳||封裝類型||介面 (輸出)||啟動||工作溫度 (Min.)[°C]||工作溫度 (Max.)[°C]||供應電壓 [V]||電流消耗|
|3||8g, 16g, 32g, 64g, User-selectable||4096, 2048, 1024, 512 (16-bit), (counts/g)||300||8-bit, 16-bit||2x2x0.9mm||12-pin||LGA||Digital SPI/I²C||Yes||-40||105||1.7-3.6||0.5-162 μA|
|KX134-1211-EVB110||KX134-1211 Evaluation Board||
KMAEDA006R00 Board Layout (RoKiX Digital Evaluation Board)
KMAEDA006R00 Schematic (RoKiX Digital Evaluation Board)
|IoT Evaluation and Development Kit||Kionix's IoT evaluation kit utilizes hardware platform based on Nordic Semiconductor's Bluetooth LE SoC. The compact (27/32mm x 4.2mm), highly integrated modular sensor system integrates Kionix's accelerometer (KX122-1037), combo accel-mag (KMX62-1031), and combo accel-gyro (KXG07) sensors along with ROHM's barometric pressure sensor (BM1383AGLV). Additional sensors can be evaluated using the add-on board that can fit inside the kit. This enables measurement of 3D acceleration, 3D magnetism, 3D rotation, air pressure, and temperature, making it ideal for training, prototyping, and initial set development of IoT and wearable applications.|